
Vacuum pumps
AT4
4 m³/h
TEPRO
TEPRO AT-series vacuum pumps, T250 and T300 models, and the SR500 pumping unit. A dedicated range for industrial vacuum processes: compare pumping speed, ultimate pressure, motor power and operating mode.



Models: 13

Vacuum pumps
4 m³/h

Vacuum pumps
6 m³/h

Vacuum pumps
8 m³/h

Vacuum pumps
12 m³/h

Vacuum pumps
21 m³/h

Vacuum pumps
23 m³/h

Vacuum pumps
35 m³/h

Vacuum pumps
57 m³/h

Vacuum pumps
92 m³/h

Vacuum pumps
260 (50 Hz) 310 (60 Hz) m³/h

Vacuum pumps
305 (50 Hz) 360 (60 Hz) m³/h

Vacuum pumps
630 m³/h

Pumping unit
Roots: 500 m³/h · unit: up to 450 m³/h
No models found. Change your search.
Consider system volume, required evacuation time, working pressure and gas load. Nominal pumping speed and pumping speed at atmospheric pressure are different specifications and must be compared under the same conditions.
It is the lowest pressure specified for a particular configuration and operating conditions. Actual system pressure also depends on leaks, gas load and connections.
No. Operating mode depends on the model and version. AT8 and AT21 require intermittent operation. Check the exact pump documentation and permitted start frequency before selection.
Gas composition and contamination require separate assessment. Water vapour calls for an appropriate configuration and gas ballast; dust requires suitable inlet filtration. Confirm compatibility with the actual process before use.
The SR500 is a pumping unit combining a Roots blower and a rotary pump. Component capacities and the maximum pumping speed of the complete unit are listed separately; these values must not be added together.
Leave a phone number or an email address — one contact method is enough.